NOTE! THE NEW STANDARD DISTANCE FROM THE TOP AND THE BOTTOM FOR HINGE BORING IS NOW 3". (IT IS NO LONGER 3 1/8", SO IF YOU PICK THE 3 1/8" SETTING, YOUR DOORS WILL STILL BE DRILLED AT 3" TO THE CENTER) !!! Thanks
HOWEVER, IF YOU ACTUALLY DO WANT 3 1/8" BORING, SIMPLY CHOOSE 3 1/8" AND THEN PUT IN A NOTE IN THE "COMMENTS/SPECIAL INSTRUCTIONS" BOX AT THE BOTTOM OF THE PAGE STATING THAT YOU ACTUALLY WANT 3 1/8" BORING.
REMEMBER TO CLICK ON THE "UPDATE" LINK BELOW THE BOX TO SAVE IT INTO YOUR SHOPPING CART.
TO PLAY SAFE, WHEN YOU GO TO THE CHECKOUT AREA, VERIFY THAT IT IS STILL THERE . ONCE YOU ARE IN THE CHECKOUT AREA, IT WILL AUTOMATICALLY BE SAVED, SO YOU CAN REST ASSURED THAT YOUR ORDER WILL HAVE THOSE SPECIAL BORING INSTRUCTIONS ON IT. WE WILL SEND AN EMAIL NOTE CONFIRMING IT, AND WE WILL BORE THE DOOR TO YOUR SPECS.
The Center Of Bore is the location of the Middle-point (center) of the holes in relataion to the Top and Bottom of the Door.
You can customize these locations by specifying a value from 2 3/4" - 6". SEE BOTTOM OF THIS PAGE
HINGE SIDE DOESN'T MATTER ON SYMMETRICAL DOORS, BECAUSE THEY CAN BE FLIPPED TO HINGE RIGHT OR LEFT.
HINGE SIDE DOESN'T MATTER ON SYMMETRICAL DOORS, BECAUSE THEY CAN BE FLIPPED TO HINGE RIGHT OR LEFT.
Standard Boring: 3" from the Top of the door to the centerline of the Top hole, and 3" from the Bottom of the door to the centerline of the Bottom Hole. This boring pattern will add $1.00 per hole to the cost of the door, and will be included in the door price shown.
Special Boring: If you decide NOT to select the Standard 3" boring pattern described above, and choose to pick a different, 'Non-Standard' measurement in the drop-down menu (a ($) follows the 'Special Boring' choices), the price will be $2.00 per hole, and will be included in the door price shown.
You can access the "HINGE BORING" LOCATIONPAGE by clicking on the word (change) next to the Option "Hinge Boring"in your shopping cart.
IF YOU DECIDE THAT YOU NEED TO HAVE HINGE BORING THAT IS DIFFERENT THAN WHAT WE OFFER AS STANDARD, WE WILL TRY TO ACCOMODATE YOU. YOU CAN PUT YOUR INSTRUCTIONS IN THE "COMMENTS/SPECIALINSTRUCTIONS" BOX ON YOUR ORDER.
THERE ARE EXTRACHARGES FOR THIS SERVICE THAT ARE PRICED AS FOLLOWS:
- Standard Concealed Hinge Boring: If A Door Is Bored @ 3" Symmetrically, It Costs 1.00 Per Hole.
- "SPECIAL" Concealed Hinge Boring:If Door Is Bored At Anything Other Than 3", It Is "Special" And Costs 2.00 Per Hole (This Includes The Hole At The 3" Position, Because All The Bores Need To Be Assigned To A Person, Rather Than Being Done Automatically By A Very Fast Machine).
- "ASYMMETRICAL SPECIAL" Concealed Hinge Boring: If The Door Is Also Asked To Be Made Asymmetrical By Putting The Holes At Two Different Heights, The Door Is Then Considered A "Special Special" And The Boring Costs Rise To $4.00 Per Hole. ($8.00 per Door for a 2 Bore Door)
